BMW M3 F80 / M4 F82 Prepreg Dry Carbon Fiber MP Front Lip

Engineered for BMW M3 F80 and M4 F82 owners, this Prepreg (Dry) Carbon Fiber MP Front Lip adds an aggressive M Performance-style splitter line to the lower edge of the factory front bumper. Autoclave-cured in Europe and quality-controlled by BYC Performance, the BMW F80 / F82 carbon front lip bolts to OEM mounting points with no cutting or drilling required.

Designed to complement the aggressive character of the S55B30T0-powered previous-generation M3/M4 family (425 hp standard, 444 hp Competition, 460 hp CS, 493 hp GTS), this dry carbon front lip contributes to front downforce balance and lowers the visual stance. The ideal premium aero part for any serious BMW M3 F80 tuning or M4 F82 modification project.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure, uniform resin distribution.
• M Performance Styling: True-carbon version of the OEM MP front lip geometry.
• Single-Piece Build: One continuous lip with no modular seam.
• Aero Function: Manages high-speed front underbody flow and contributes to downforce.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under UV-protective clear coat.
• OEM Fit: Direct bolt-on to F80 sedan and F82/F83 coupé/convertible front bumpers.
• Lightweight: Noticeably lighter than plastic aftermarket parts.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — which can leave air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• Controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW F80 / F82 front lip fits the following models perfectly:

• BMW M3 F80 Sedan (2014-2018) — S55 engine (425 hp)
• BMW M3 Competition F80 (2016-2018) — S55 (444 hp)
• BMW M3 CS F80 (2018, limited) — S55 (460 hp)
• BMW M4 F82 Coupé (2014-2020) — S55
• BMW M4 Competition F82 (2016+) — S55 (444 hp)
• BMW M4 CS F82 (2017-2018) — S55 (460 hp)
• BMW M4 GTS F82 (2016, limited) — S55 (493 hp)
• BMW M4 F83 Convertible (2014-2020) — S55

NOTE: This product is NOT compatible with BMW M3 G80 / M4 G82 (2021+, S58 engine) or with BMW M2 F87 / BMW M2 G87 — those use different front bumper geometries.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss UV-Protective Clear Coat
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

The BMW F80 / F82 carbon front lip mounts with a combination of OEM hardware and automotive-grade 3M VHB tape. Professional installation recommended:

1. Clean the underside of the front bumper with isopropyl alcohol.
2. Test-fit the lip and verify alignment with OEM clip points.
3. Tighten clips and screws to the manufacturer's recommended torque.
4. Peel VHB tape backing and press firmly into place.
5. Avoid washing for the first 48 hours.

Care & Maintenance

Use pH-neutral car shampoo. Keep pressure washer nozzles at least 30 cm away. Apply carbon-safe sealant every 6 months.

FAQ

Does this lip fit the G80 / G82?
No. G80/G82 (2021+, S58 engine) use a different front bumper. A separate G-generation catalog is available.

Is there a difference between F80 Sedan and F82 Coupé fitment?
No. The front bumper bottom edge is identical on both; the lip fits both perfectly.

Compatible with M4 CS, GTS, and Competition trims?
Yes. All F80/F82 trims share the same front bumper geometry.

Does this fit the M2 F87?
No. M2 F87 uses different front bumper and chassis geometry.

Does it fit the F83 Cabriolet?
Yes — BMW M4 F83 Convertible is fully compatible.

How much ground clearance will I lose?
The lip sits roughly 8-10 cm above the ground. Use caution at speed bumps and steep driveway entries.

Shipping time?
In-stock items ship within 1-3 business days.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M3 carbon parts, BMW M4 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.