BMW M3 G80 / M4 G82 Prepreg Dry Carbon Fiber MP Front Canard

Engineered for BMW M3 G80 and M4 G82 owners, this Prepreg Dry Carbon Fiber MP Front Canard brings M Performance-inspired wing styling to the front bumper corners with aerodynamic benefit. Manufactured in Europe and quality-controlled by BYC Performance, this BMW G80 / G82 carbon MP canard set mounts directly to the OEM bumper surface.

If you're building a serious BMW M3 G80 tuning or M4 G82 modification project and want subtle M Performance-aligned aero accents, this dry carbon MP canard set is built for you. Autoclave-cured prepreg carbon is noticeably lighter than wet-lay carbon and offers excellent UV resistance. Fits all S58-powered current-generation cars — M3 G80 Sedan, M3 Touring G81, M4 G82 Coupé and M4 G83 Convertible (473-543 hp) — across every trim, including Competition, CS and CSL.

Key Features

• Prepreg Dry Carbon Technology: Cured in an autoclave under high heat and pressure.
• MP-Style Canard Design: Inspired by the BMW M Performance catalog; aggressive yet OEM-aligned profile.
• Aerodynamic Gain: Reduces front-axle lift and sharpens steering response.
• High Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Mounts on M3 G80 Sedan and M4 G82/G83 Coupé/Convertible bumpers with 3M VHB tape.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, and road debris.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg dry carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This BMW G80 / G82 carbon MP canard fits the following models:

• BMW M3 G80 Sedan (2021, 2022, 2023, 2024, 2025) — S58 (473 hp)
• BMW M3 Competition G80 (2021+) — S58 (503 hp)
• BMW M3 CS G80 (2023+, limited) — S58 (543 hp)
• BMW M3 Touring G81 (2022+) — S58 (503 hp)
• BMW M4 G82 Coupé (2021+) — S58 (473/503 hp)
• BMW M4 Competition G82 (2021+) — S58 (503 hp)
• BMW M4 CSL G82 (2022-2023, limited) — S58 (543 hp)
• BMW M4 G83 Convertible / Cabriolet (2021+) — S58 (503 hp)

NOTE: This canard is NOT compatible with the previous-generation BMW M3 F80 / M4 F82 (S55) or BMW M2 G87. The F-generation and M2 G87 use different front bumper surfaces.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Canard installation uses 3M VHB tape. Professional installation recommended:

1. Clean mounting area with isopropyl alcohol.
2. Test-fit the canard and mark its position.
3. Peel the 3M VHB backing and press firmly into place.
4. Install optional rear support screws.
5. Do not wash the vehicle for 24 hours.

Care & Maintenance

Use pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Avoid directing high-pressure water at canard edges.

FAQ

Compatible with both M3 G80 and M4 G82?
Yes. Front bumper side-surface geometry is identical across M3 G80 Sedan, M4 G82 Coupé, and M4 G83 Convertible.

Compatible with M3 CS / M4 CS / M4 CSL?
Yes. All G80/G82 trims share the same front bumper mounting geometry.

What is the difference between MP and AC canards?
The MP canard is more subtle and matches the OEM M Performance design language; the AC canard is more aggressive with a larger wing.

Does it fit the BMW M2 G87?
No. M2 G87 uses a different front bumper surface.

Compatible with M3 F80 / M4 F82 (previous gen)?
No. The F-generation has different front bumper geometry.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes BMW M3 carbon parts, BMW M4 carbon diffusers, Audi RS carbon hoods, Porsche carbon spoilers, and many more high-quality carbon components.