Lamborghini Huracán EVO (2019-2024) Prepreg Dry Carbon Fiber Front Air Canard

Engineered for Lamborghini Huracán EVO (2019-2024) owners, this Prepreg Dry Carbon Fiber Front Air Canard adds STO and Tecnica-level functional aero detail at the front bumper side-wing area of your V10 supercar. Manufactured in Europe and quality-controlled by BYC Performance, this Lamborghini Huracán EVO carbon front canard applies to the OEM surface via 3M double-sided tape — no drilling, no permanent modification required.

This dry carbon front air canard complements EVO's 5.2L V10 NA mid-engine track DNA by contributing to front-axle downforce distribution. Autoclave-cured prepreg carbon fiber delivers a noticeably lighter panel than wet-lay parts and outstanding UV resistance. Brings STO and Tecnica-level front-wing aggression to your standard EVO.

Key Features

• Prepreg Dry Carbon Technology: Cured in an autoclave under high heat and pressure for a more consistent weave.
• Pair Set (Left/Right): Mirrored canard pair.
• Aero Contribution: Adds front-axle downforce at speed; channels front fender airflow.
• 3M Tape Mount: No drilling/cutting; protects OEM paint.
• STO/Tecnica-Inspired Profile: Track-derived canard geometry.
• 2x2 Twill Carbon Weave: Authentic carbon under high-gloss UV-protective clear coat.
• UV & Chemical Protection: Years of fade and crack resistance.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Huracán EVO carbon front air canard fits:

• Lamborghini Huracán EVO Coupé (2019-2024) — 5.2L V10, 640 hp, AWD
• Lamborghini Huracán EVO Spyder (2019-2024) — 5.2L V10, 640 hp
• Lamborghini Huracán EVO RWD (2019-2024) — 5.2L V10, 610 hp, RWD
• Lamborghini Huracán STO (2020-2023) — surface compatible; verify clearance with factory canards
• Lamborghini Huracán Tecnica (2022+) — compatible
• Lamborghini Huracán Sterrato (2023-2024) — surface check recommended due to factory protection panels

Important notes:

• Not designed for Huracán Gen 1 (LP610/LP580/Performante, 2014-2019) front bumper geometry.
• NOT compatible with Audi R8 Type 4S.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Mounting: 3M Double-Sided Tape (pre-applied)
• Set: Left + Right canards (pair)
• Origin: Europe

Installation Notes

1. Clean the front bumper side-wing area with isopropyl alcohol.
2. Surface temperature should be 18-25°C.
3. Dry-fit the canards for alignment.
4. Peel the 3M backing and press firmly with even pressure.
5. Avoid water and direct sunlight for 24 hours after installation.

Care & Maintenance

Wash with pH-neutral car shampoo. Avoid direct pressure-washer spray at canard edges (keep 30 cm distance). Apply carbon-safe sealant every 6 months.

FAQ

Does this fit the Huracán Gen 1 (LP610/LP580/Performante)?
No. Gen 1 front bumper geometry differs from EVO.

Compatible with the STO?
Surface is compatible; verify clearance against factory STO canards.

Compatible with the Spyder?
Yes. EVO Coupé and Spyder share the same front bumper geometry.

Does this fit the Audi R8?
No.

Removable?
Yes — 3M tape can be removed with gentle heat; no paint residue.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon diffusers, BMW M3 carbon diffusers, Porsche carbon spoilers, Ferrari carbon components, and many more high-quality carbon parts.