Lamborghini Huracán EVO (2019-2024) Prepreg Dry Carbon Fiber Rear Air Canard

Engineered for Lamborghini Huracán EVO (2019-2024) owners, this Prepreg Dry Carbon Fiber Rear Air Canard adds STO-level aero detail to the rear fender surface of your V10 supercar and channels high-speed airflow at the rear wheel arch. Manufactured in Europe and quality-controlled by BYC Performance, this Lamborghini Huracán EVO carbon rear canard applies to the OEM surface via 3M double-sided tape — no drilling, no permanent modification required.

If you're building a serious Lamborghini Huracán EVO tuning project and want to bring STO and Tecnica's track-derived aero detail to your standard EVO, this dry carbon rear air canard is built for you. Autoclave-cured prepreg carbon fiber delivers a noticeably lighter, far stronger panel than wet-lay parts, with outstanding long-term UV resistance. The aggressive canard profile complements EVO's 5.2L V10 NA mid-engine track DNA — both visual and functional.

Key Features

• Prepreg Dry Carbon Technology: Cured in an autoclave under high heat and pressure for a more consistent weave.
• STO/Tecnica-Inspired Profile: Race-derived geometry separates rear fender airflow from side-wash turbulence.
• Lightweight: A worthwhile weight saving; no balance impact.
• 3M Double-Sided Tape Mount: No drilling required; protects OEM paint.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under high-gloss UV-protective clear coat.
• UV & Chemical Protection: High-gloss UV resin resists fading, stone chips, and road tar.
• Mirrored Pair: Left and right canards supplied as a symmetric set.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Huracán EVO carbon rear air canard fits:

• Lamborghini Huracán EVO Coupé (2019-2024) — 5.2L V10, 640 hp, AWD
• Lamborghini Huracán EVO Spyder (2019-2024) — 5.2L V10, 640 hp
• Lamborghini Huracán EVO RWD (2019-2024) — 5.2L V10, 610 hp, RWD
• Lamborghini Huracán STO (2020-2023) — surface compatible; verify clearance with factory STO rear wing brackets
• Lamborghini Huracán Tecnica (2022+) — 5.2L V10, 640 hp, RWD
• Lamborghini Huracán Sterrato (2023-2024) — verify surface clearance against factory fender reinforcement panels

Important notes:

• Not designed for Huracán Gen 1 (LP610/LP580/Performante, 2014-2019) fender/side geometry.
• NOT compatible with Audi R8 Type 4S.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Mounting: 3M Double-Sided Tape (pre-applied)
• Origin: Europe

Installation Notes

1. Clean the mounting surface with isopropyl alcohol and let dry.
2. Surface temperature should be 18-25°C.
3. Dry-fit the canard against the OEM fender line for reference.
4. Peel the 3M protective backing and press firmly with even pressure.
5. Avoid water and direct sunlight for 24 hours after installation (3M tape full cure).

Care & Maintenance

Wash with pH-neutral car shampoo. Do not direct pressure-washer spray at canard edges (keep 30 cm distance). Apply carbon-safe sealant every 6 months.

FAQ

Does this fit the Huracán Gen 1 (LP610/LP580/Performante)?
No. The Huracán Gen 1 rear flank line differs from EVO; Gen 1 owners should contact BYC for rear-canard options.

Compatible with the STO?
Surface is compatible, but verify clearance with factory STO rear-wing mounting brackets.

Does this fit the Audi R8?
No. Although Huracán and R8 share a platform, fender geometry differs.

Removable?
Yes — 3M tape can be removed with gentle heat (hair dryer). No paint residue.

Will rain damage it?
No. Autoclave-cured prepreg carbon is fully waterproof, freeze-proof, and crack-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon diffusers, BMW M3 carbon diffusers, Porsche carbon spoilers, Ferrari carbon components, and many more high-quality carbon parts.