Porsche Cayenne 9YA (2018+) Prepreg Dry Carbon Fiber Vented Hood

Engineered for Porsche Cayenne 9YA (E3 / PO536, 2018+) owners, this Prepreg Dry Carbon Fiber Vented Hood brings motorsport-grade aggression to the front of your luxury SUV while improving engine bay heat extraction. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Cayenne carbon hood bolts directly to OEM hinge and latch points — no cutting, no drilling.

If you're building a serious Porsche Cayenne tuning project and want a part that exceeds the factory aluminum/steel hood in both weight and function, this dry carbon vented hood is built for you. Autoclave-cured prepreg carbon delivers significant weight savings over the factory hood, reducing front axle mass for improved steering feel and brake response. The vent design is sized to handle the heat load of the 4.0L V8 biturbo Turbo (550 hp) and Turbo GT (631 hp) engines, helping reduce engine bay temperatures.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure with homogeneous resin distribution and a more consistent weave.
• Functional Vents: Extract hot air from the engine bay, improving service life and performance consistency.
• Significant Weight Savings: Substantially lighter than the OEM aluminum/steel hood; front-axle mass reduction improves driving dynamics.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug-and-play on Cayenne 9YA SUV and Coupé hinge and latch points.
• UV & Heat Protection: Clear coat resists engine bay heat, UV fading, and road chemicals.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon is wet lay-up with hand-applied resin cured at room temperature — leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Cayenne vented hood fits the following models:

• Porsche Cayenne 9YA SUV (2018, 2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Porsche Cayenne 9YA Coupé (2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Cayenne S 3.0L V6 turbo (340 / 440 hp)
• Cayenne GTS 4.0L V8 biturbo (460 hp)
• Cayenne Turbo 4.0L V8 biturbo (550 hp)
• Cayenne Turbo GT Coupé 4.0L V8 biturbo (631 hp)
• Cayenne E-Hybrid / Turbo S E-Hybrid

Important notes:

• NOT compatible with previous-generation Porsche Cayenne 9PA (2010-2018, 958.1 / 958.2). Different hood geometry.
• A solid (non-vented) Porsche Cayenne carbon hood version is also available in our catalog.
• Lighter hood-strut pistons are recommended — OEM pistons may open aggressively with the lighter carbon panel.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Direct bolt-on to factory hinges. Professional installation strongly recommended:

1. Park on level ground, allow engine to cool.
2. Remove OEM hood pistons and detach hinges.
3. With at least 2 people, lift the carbon hood onto the hinges.
4. Install hinge bolts loosely; adjust hood-bumper gap (3-5 mm).
5. Torque all bolts to the manufacturer's recommended torque.
6. Test the latch mechanism; adjust latch pin height as needed.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm away. Avoid washing while engine is hot.

FAQ

Does this fit the 9PA (2010-2018)?
No. The 9PA is the previous generation with different hood geometry.

Compatible with both SUV and Coupé?
Yes. Cayenne 9YA SUV and Coupé share the same front hood line and hinge points.

Are the vents truly functional?
Yes. The vents extract hot air from the engine bay — especially beneficial on V8 biturbo Turbo and Turbo GT engines.

Is a non-vented version available?
Yes. A solid Cayenne 9YA carbon hood is available as a separate SKU in our catalog.

Will the hood struts cause issues?
Because the carbon hood is lighter, the OEM struts may open aggressively. Lighter-rated piston struts are recommended.

Will rain damage dry carbon?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via oversized freight.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Porsche Cayenne carbon parts, Porsche carbon spoilers, Audi RS carbon hoods, BMW M carbon parts, and more.