Porsche Panamera 971 (2017+) Prepreg Dry Carbon Fiber Front Fender Air Duct

Engineered for Porsche Panamera 971 (G2, 2017+) owners, this Prepreg Dry Carbon Fiber Front Fender Air Duct set converts the side fender vent detail of your luxury GT sedan into a motorsport-grade carbon accent. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Panamera carbon fender air duct mounts to the OEM fender side surface using 3M VHB tape — no cutting, no drilling, no painting required.

If you are building a Porsche Panamera tuning project and want a side-profile carbon detail that catches the eye, this dry carbon front fender air duct set is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, offers very high strength for its weight, and resists long-term UV fading. Visually complements the 971's drivetrain range — 2.9L V6 biturbo, 4.0L V8 biturbo, and Turbo S E-Hybrid (700 hp combined).

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave and balanced resin distribution.
• Left + Right Pair: Symmetrical driver- and passenger-side set.
• Side-Profile Detail: Mounts to the front fender side surface, enriching the side profile with a clean carbon accent.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• Lightweight: Offers a worthwhile weight saving over the painted plastic OEM part.
• 3M VHB Tape Mounting: No-damage, no permanent modification.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, bug spatter, and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Panamera 971 carbon front fender air duct fits the following models:

• Porsche Panamera 971 Sedan (2017-2024) — all trims
• Porsche Panamera Sport Turismo 971 (2018-2024) — all trims
• Porsche Panamera 4 / 4S / GTS / Turbo / Turbo S 971
• Porsche Panamera Turbo S E-Hybrid 971 (700 hp combined)
• Porsche Panamera 4 E-Hybrid / 4S E-Hybrid 971
• Compatible with both pre-facelift (2017-2020) and post-facelift (2021+) models (front fender side geometry unchanged by facelift)

Important notes:

• This product is NOT compatible with the previous-generation Porsche Panamera 970 (2009-2016). The 970 has different fender geometry.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Set Contents: 2 pieces (left + right)
• Origin: Europe

Installation Notes

Installing the Porsche Panamera carbon front fender air duct is quick. Professional installation is recommended:

1. Clean the fender side surface with isopropyl alcohol.
2. Mark the part position via a dry-fit test.
3. Peel the 3M VHB liner and place the part.
4. Apply even pressure for 24 hours to activate the adhesive.
5. Do not wash the vehicle for the first 48 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the Porsche Panamera 970 (2009-2016)?
No. The 970 has different fender geometry.

Compatible with Sport Turismo (wagon)?
Yes. The Panamera 971 Sedan and Sport Turismo share the same front fender.

Is the pre-facelift and post-facelift Panamera 971 front fender the same?
Yes. The 2020 facelift did not change the front fender side geometry; both periods are compatible.

Will 3M VHB tape damage the fender over time?
No. 3M VHB is automotive-approved and removable without paint damage.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Audi RS carbon diffusers, BMW M carbon diffusers, Porsche 911 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.