Porsche Panamera 971 Sedan (2017+) Prepreg Dry Carbon Fiber Spoiler

Engineered for Porsche Panamera 971 Sedan (G2, 2017+) owners, this motorsport-inspired Prepreg Dry Carbon Fiber Spoiler transforms the trunk lid of your luxury GT sedan with track-grade aggression while supporting rear-axle stability at speed. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Panamera carbon spoiler fits the OEM trunk lid via 3M VHB tape — no permanent modification required.

If you are building a Porsche Panamera tuning project and want a static aero accent that visually reinforces the factory active rear wing, this dry carbon spoiler is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, with far superior structural integrity and outstanding long-term UV resistance. The aggressive geometry complements the 971's 4.0L V8 biturbo (Turbo / Turbo S, 550-630 hp) and Turbo S E-Hybrid (700 hp combined) power delivery.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure ensure homogeneous resin distribution and a more consistent weave.
• Trunk-Lid Lip Design: Extends the Panamera 971 Sedan's fastback trunk-lid line with a motorsport-inspired profile.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• Aerodynamic Performance: Static lip surface supports rear-axle grip at speed, complementing the factory active rear wing.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• 3M VHB Tape Mounting: Professional 3M VHB double-sided tape provides no-damage adhesion to the OEM trunk lid.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, bug spatter, and road tar.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Panamera 971 Sedan carbon spoiler fits the following models:

• Porsche Panamera 971 Sedan (2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024) — all trims
• Porsche Panamera 4 / 4S 971 Sedan — 2.9L V6 biturbo (440 hp)
• Porsche Panamera GTS 971 Sedan — 4.0L V8 biturbo (480 hp)
• Porsche Panamera Turbo / Turbo S 971 Sedan — 4.0L V8 biturbo (550-630 hp)
• Porsche Panamera Turbo S E-Hybrid 971 Sedan (700 hp combined)
• Porsche Panamera 4 E-Hybrid / 4S E-Hybrid 971 Sedan
• Compatible with both pre-facelift (2017-2020) and post-facelift (2021+) Sedan models

Important notes:

• This spoiler is designed for the Panamera 971 Sedan trunk-lid geometry ONLY. Sport Turismo (wagon, 2018+) is NOT compatible — Sport Turismo uses an integrated roof spoiler and different rear deck geometry.
• This product is NOT compatible with the previous-generation Porsche Panamera 970 (2009-2016).
• Does not interfere with the factory active rear wing's deployment travel; functions as a static lip.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Mounting: 3M VHB double-sided tape (included)
• Origin: Europe

Installation Notes

Installing the Porsche Panamera 971 carbon spoiler requires care; professional installation is strongly recommended:

1. Clean the trunk lid with isopropyl alcohol and ensure it is dry.
2. Mark the spoiler position relative to the trunk lid / panel edges.
3. Peel the 3M VHB liner gradually along the spoiler length.
4. Apply even pressure for 24 hours to activate the adhesive (use clamps or foam pads).
5. Do not wash or drive at high speed for the first 48 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Compatible with Panamera Sport Turismo (wagon)?
No. Sport Turismo uses an integrated roof spoiler and different rear deck geometry; this spoiler fits the Panamera 971 Sedan trunk lid only.

Compatible with Panamera 970 (2009-2016)?
No. The 970 and 971 have different trunk-lid geometry.

Difference between pre-facelift and post-facelift Panamera Sedan?
No. The 2020 facelift did not change the trunk-lid exterior geometry; both periods fit.

Does it interfere with the factory active rear wing?
No. It sits as a static lip at the trunk-lid rear edge and does not block the active wing deployment.

Will 3M VHB tape damage the trunk lid over time?
No. 3M VHB is automotive-approved and removable without paint damage.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. International shipping available.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Audi RS carbon diffusers, BMW M carbon diffusers, Porsche 911 carbon spoilers, and many more high-quality carbon components.