Porsche Taycan | Prepreg Dry Carbon Fiber Hood

Porsche Taycan (2019+) Prepreg Dry Carbon Fiber Hood

Engineered for Porsche Taycan J1 (2019+, first-gen electric sport sedan) owners, this motorsport-inspired Prepreg Dry Carbon Fiber Hood transforms the front of your 800V electric sport sedan with track-grade aggression while delivering substantial front-axle weight reduction. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this Porsche Taycan carbon hood bolts directly to OEM hinge and latch points, no cutting, no drilling, no modification required.

If you are building a Porsche Taycan tuning project and want to drop weight from the factory steel/aluminum hood while sharpening the aero profile, this dry carbon hood is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, offers very high strength for its weight, and resists long-term UV fading. Matches the performance signature of the Taycan's 800V dual-motor lineup (Turbo S 750 hp launch, Turbo GT 2024+ 1019 hp launch, 0-100 km/h ~2.2 s).

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave and balanced resin distribution.
• Substantial Weight Savings: Noticeably lighter than the factory aluminum/steel hood; reduces front-axle mass and improves front-rear balance.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• OEM Hinge Compatibility: Directly compatible with factory hinge, latch, and damper points.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, stone chips, and road-tar splash.
• Direct OEM Fit: Plug & play installation on factory Porsche Taycan (J1, 2019+) hood mounting points.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the Porsche Taycan carbon hood requires professional installation:

1. Safely deactivate the battery (observe high-voltage system warnings).
2. Have a second person assist with hinge removal of the original hood.
3. Test-fit the carbon hood to hinge holes.
4. Transfer the latch to the new hood.
5. Adjust panel gaps (door / fender clearance).
6. Test the gas damper struts; replace with carbon-spec struts if needed.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Compatible with Taycan Cross Turismo or Sport Turismo?
Yes. Sedan, Cross Turismo, and Sport Turismo share the same front-end sheetmetal; this hood fits all three.

Does the trim matter (Turbo S vs GTS vs base)?
No. All Taycan J1 trims share the same hood geometry.

Can I use the factory hood gas struts?
The carbon hood is lighter so the factory gas struts are usually sufficient, but for Cross Turismo or aggressive struts an aftermarket carbon-spec strut may be recommended.

Can I reuse the hood insulation pad?
The hood ships as a single piece with inner support panel; the original sound-deadening pad can usually be transferred.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
The hood is an oversized item; carrier confirmed after order. Estimated delivery 3-7 business days. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Audi RS carbon diffusers, BMW M carbon diffusers, Porsche 911 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.