Porsche Taycan (2019+) Prepreg Dry Carbon Fiber Side Skirt

Engineered for Porsche Taycan J1 (2019+, first-gen electric sport sedan) owners, this Prepreg Dry Carbon Fiber Side Skirt set lowers the visual silhouette of your 800V electric sedan and delivers a motorsport-inspired stance. Manufactured in Europe and quality-controlled by BYC Performance, this Porsche Taycan carbon side skirt mounts to the OEM rocker using 3M VHB tape plus factory screw points — no permanent cutting required.

If you are building a Porsche Taycan tuning project and want a side-profile aero element that visually plants the GT-electric line, this dry carbon side skirt set is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay carbon parts, offers very high strength for its weight, and resists long-term UV fading. Matches the Taycan's 800V dual-motor performance signature (Turbo S 750 hp launch, Turbo GT 2024+ 1019 hp launch).

Key Features

• Prepreg (Dry) Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave and balanced resin distribution.
• Left + Right Pair: Driver-side and passenger-side set.
• Aggressive Profile: Sits below the OEM rocker, visually lowering the side profile.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under a high-gloss UV-protective clear coat.
• 3M VHB + Screw Mounting: 3M VHB tape combined with OEM screw points for a tight fit.
• Direct OEM Fit: Compatible with Taycan Sedan, Cross Turismo, and Sport Turismo wagon — all share the same rocker line.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger for its weight
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Porsche Taycan J1 carbon side skirt fits the following models:

• Porsche Taycan Sedan J1 (2019-2024) — all trims
• Porsche Taycan Cross Turismo J1 (2021+) — shared rocker line (raised suspension package available on Cross Turismo)
• Porsche Taycan Sport Turismo J1 (2022+) — shared rocker line
• Porsche Taycan / 4 / 4S / GTS / Turbo / Turbo S / Turbo GT J1

Important notes:

• Taycan is a single-generation (J1) model, so no previous-gen disclaimer applies.
• Ground clearance on the Cross Turismo raised-suspension package will differ; please share a pre-order photo for confirmation.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Set Contents: 2 pieces (left + right)
• Origin: Europe

Installation Notes

Installing the Porsche Taycan carbon side skirt requires professional installation:

1. Clean the rocker surface with isopropyl alcohol.
2. Test-fit the part for alignment; locate OEM screw points and clips.
3. Peel the 3M VHB liner and place along the skirt line.
4. Torque the screws at OEM points to the manufacturer's recommended torque.
5. Do not wash or drive at high speed for the first 48 hours.
6. Mind the lowered ground clearance over speed bumps and steep ramps.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Compatible with Cross Turismo / Sport Turismo?
Yes. Cross Turismo and Sport Turismo share the same rocker line as the Sedan. Ground clearance on the Cross Turismo raised-suspension package will differ; please share a pre-order photo.

Does the trim matter?
No. All Taycan J1 trims (Taycan, 4S, GTS, Turbo, Turbo S, Turbo GT) share the same rocker geometry.

Does it affect rocker-mounted sensors?
No. The Taycan does not have rocker-mounted sensors or cameras; installation has no effect.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days. Long parts routed via a suitable carrier confirmed after order.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Porsche carbon parts, Audi RS carbon diffusers, BMW M carbon diffusers, Porsche 911 carbon spoilers, and many more high-quality carbon components. All parts undergo strict quality control.