Lamborghini Huracán Gen 1 to EVO Conversion Prepreg Dry Carbon Fiber Body Kit

Engineered for Lamborghini Huracán Gen 1 (LP610-4 / LP580-2 / Performante, 2014-2019) owners, this Prepreg Dry Carbon Fiber EVO Body Kit is a comprehensive conversion kit that transforms your V10 supercar's front fascia into the modernized post-facelift EVO look — Y-shaped lower intake geometry, redesigned front bumper aero. Manufactured in Europe and quality-controlled by BYC Performance, this Lamborghini Huracán EVO body kit brings the EVO front face to Gen 1 cars.

If you own an LP610-4, LP580-2, or Performante and want to refresh your car's identity to the aggressive post-2019 EVO front fascia, this Gen 1 → EVO conversion kit is built for you. Autoclave-cured prepreg carbon fiber delivers a noticeably lighter panel than wet-lay parts and outstanding UV resistance. Preserves the Huracán's 5.2L V10 NA mid-engine track DNA while modernizing its visual identity for both road and track.

Key Features

• Prepreg Dry Carbon Technology: Cured in an autoclave under high heat and pressure for a more consistent weave.
• Full EVO Front-Face Conversion: Transforms Gen 1 Huracán front bumper to EVO look (Y-shaped lower intake geometry).
• Kit Contents: Front bumper and related carbon components (verify exact contents via product description and customer service).
• OEM Chassis Fit: Compatible with Gen 1 Huracán OEM mounting points; full installation required.
• Race DNA: EVO generation's track-derived lower intake channel geometry.
• 2x2 Twill Carbon Weave: Authentic carbon under high-gloss UV-protective clear coat.
• UV & Chemical Protection: Years of fade and stone-chip resistance.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Huracán EVO body kit is a conversion kit for the following Gen 1 models:

• Lamborghini Huracán LP610-4 Coupé (2014, 2015, 2016, 2017, 2018) — 5.2L V10, 610 hp, AWD
• Lamborghini Huracán LP610-4 Spyder (2016-2018) — verify Spyder geometry with professional installer
• Lamborghini Huracán LP580-2 (RWD, 2016-2018) — 5.2L V10, 580 hp
• Lamborghini Huracán Performante (2017-2019) — Performante's factory front aero (ALA) interaction must be professionally verified

Important notes:

• This is a conversion kit: it does NOT install on cars already from the EVO generation (2019+ EVO Coupé/Spyder/RWD/STO/Tecnica/Sterrato).
• NOT compatible with Audi R8 Type 4S.
• NOT compatible with Aventador.
• As a comprehensive exterior conversion, professional bodywork installation is required.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. As a comprehensive exterior conversion, professional installation is required.
2. Remove the existing OEM front bumper; mark headlight and park sensor wiring.
3. Dry-fit the new carbon EVO front bumper; use OEM chassis points as reference.
4. Route park sensors and headlight washer connections to suit the EVO face.
5. Secure with supplied hardware to the manufacturer's recommended torque.
6. Final inspection and alignment by a professional bodywork specialist recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Keep pressure washer nozzle at least 30 cm from new carbon panel edges. Apply carbon-safe sealant every 6 months.

FAQ

Can this kit be installed on EVO generation (2019-2024) cars?
No. This kit is designed to convert Gen 1 Huracán (LP610/LP580/Performante) to the EVO look. It does not install on cars that are already EVO.

Compatible with the LP580-2 RWD?
Yes. LP610-4 and LP580-2 share the same front bumper mounting points.

Compatible with the Performante?
Performante's factory front aero (ALA) interaction must be professionally verified — ALA components are Performante-specific.

Compatible with the Spyder?
Coupé front bumper geometry is shared with Spyder, but professional fitment verification is recommended.

Does this fit the Audi R8?
No.

Can I install this myself?
No. This kit is a comprehensive exterior conversion and requires professional bodywork installation.

Shipping time?
In-stock items ship within 5-10 business days via partner oversized couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon diffusers, BMW M3 carbon diffusers, Porsche carbon spoilers, Ferrari carbon components, and many more high-quality carbon parts.