Lamborghini Huracán (2014-2018) Forged Carbon Fiber Rear Bumper

Engineered for Lamborghini Huracán Gen 1 (LP610-4 / LP580-2 / Performante, 2014-2019) owners who want a one-of-a-kind aesthetic, this Forged Carbon Fiber Rear Bumper transforms the rear of your V10 supercar with motorsport-inspired aggression and a noticeably lighter panel. Manufactured in Europe to factory-spec mounting tolerances and quality-controlled by BYC Performance, this Lamborghini Huracán carbon rear bumper bolts directly to OEM mounting points — no cutting, no drilling, no permanent modification required.

If you're building a serious Lamborghini Huracán tuning project and want a part that fully departs from the factory plastic bumper in both look and finish, this forged carbon rear bumper is built for you. The Huracán's 5.2L V10 naturally-aspirated mid-engine drivetrain and its MLBevo platform (shared with the Audi R8) define Lamborghini's flagship mid-engine supercar DNA — and the swirl-pattern composite finish of forged carbon visually completes that aggressive identity.

Key Features

• Forged Carbon Technology: Chopped-strand composite construction (short carbon fiber bundles) pressed under high pressure. Unlike 2x2 twill weave, this creates a swirl-marbled finish — every panel is one-of-a-kind.
• Superior Strength: Forged carbon distributes impact energy more homogeneously than traditional twill prepreg; better crack resistance.
• Direct OEM Fit: Bolt-on to factory Lamborghini Huracán Gen 1 (LP610/LP580/Performante) rear bumper mounting points.
• Lightweight: Noticeably lighter than the factory plastic rear bumper; reduces rear axle weight.
• Aerodynamic Integration: Diffuser channels and exhaust cutouts match LP-series bumper geometry one-to-one; preserves underbody airflow.
• UV-Protective Clear Resin: Long-life clear coat protects against fading, cracking, and fuel/road tar splatter.
• Unique Aesthetic: Forged carbon weave is visually distinct from 2x2 twill carbon, giving your supercar a one-off character.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving inconsistent weight. Forged carbon, by contrast, is high-pressure compression molded:

• Cured under high heat and pressure → a more consistent weave
• Controlled resin ratio → light and well-balanced
• The same forged carbon process used by Lamborghini and Pagani in OEM components
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Huracán forged carbon rear bumper fits the following models perfectly:

• Lamborghini Huracán LP610-4 Coupé (2014, 2015, 2016, 2017, 2018) — 5.2L V10, 610 hp, AWD
• Lamborghini Huracán LP610-4 Spyder (2016-2018) — 5.2L V10, 610 hp
• Lamborghini Huracán LP580-2 (RWD, 2016-2018) — 5.2L V10, 580 hp
• Lamborghini Huracán Performante (2017-2019) — 5.2L V10, 640 hp, ALA active aero

Important notes:

• This product is NOT compatible with the Huracán EVO (2019-2024). EVO generation rear bumper and integrated diffuser geometry are entirely different.
• This product is NOT compatible with the Audi R8 Type 4S. Huracán and R8 share the MLBevo platform but rear bumper geometry differs.
• For Performante trim, check geometric clearance with the ALA active rear wing.

Technical Specifications

• Material: Forged Carbon (Chopped Strand Composite) — short-fiber bundle composite, swirl-pattern finish
• Manufacturing: High-Pressure Compression Molding
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural forged carbon swirl black
• Origin: Europe

Installation Notes

Installing the Lamborghini Huracán carbon rear bumper is a direct replacement of the OEM part. Professional installation is strongly recommended for any supercar bodywork:

1. Lift the vehicle; remove rear wheel arch liners.
2. Remove rear bumper side bolts and underbody clips.
3. Disengage exhaust tip pass-throughs from the OEM bumper.
4. Test-fit the forged carbon bumper for alignment.
5. Secure with supplied hardware to the manufacturer's recommended torque.
6. Verify exhaust tip clearance and reverse camera connections.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface. Avoid abrasive sponges and solvent-based cleaners.

FAQ

Does this fit the Huracán EVO (2019-2024)?
No. Gen 1 (LP610/LP580/Performante) and EVO have completely different rear bumper / integrated diffuser geometry. A separate EVO carbon rear bumper is available in our catalog.

Does this fit the Audi R8 Type 4S?
No. Although Huracán and R8 share the MLBevo platform, their rear bumpers, taillights, and exhaust outlet positions differ.

What's the difference between forged carbon and 2x2 twill prepreg?
Forged carbon is short-fiber bundle composite pressed under high pressure, creating a unique swirl pattern — each panel is one-of-a-kind. 2x2 twill is woven long-fiber crossweave. Forged is more unique-looking; twill is the classic carbon aesthetic.

Compatible with the Spyder?
Yes. Huracán Coupé and Spyder share identical rear bumper geometry.

Any conflict with Performante's ALA rear wing?
No. The bumper geometry is Performante-compatible; ALA active aero is a separate component.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. Oversized panels may ship by partner freight.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon diffusers, BMW M3 carbon diffusers, Porsche carbon spoilers, Ferrari carbon components, and many more high-quality carbon parts. All products undergo strict quality control.