Lamborghini Huracán Prepreg Dry Carbon Fiber MSY Body Kit

Built for Lamborghini Huracán Gen 1 (LP610-4 / LP580-2 / Performante, 2014-2018) owners who want a complete track-spec transformation, this Prepreg Dry Carbon Fiber MSY Body Kit replaces the factory plastic exterior with a coordinated, motorsport-grade carbon set. Manufactured in Europe and quality-controlled by BYC Performance, the Huracán MSY carbon body kit uses OEM bumper and rocker mounting points where geometry allows.

If your Lamborghini Huracán tuning build calls for a complete exterior — not a single piece — the MSY carbon body kit ties together front bumper cladding, side skirts, and rear aero elements in a single quality standard. The lines are inspired by the Performante and Super Trofeo race car silhouette. Every panel is autoclave-cured prepreg carbon — noticeably lighter than typical wet-lay parts.

Key Features

• Complete Set: Front bumper cladding, side skirts and rear aero in one kit.
• Prepreg (Dry) Carbon Technology: Autoclave cure under high heat and pressure gives a more consistent weave.
• MSY Design Language: Aggressive geometry inspired by Performante / Super Trofeo.
• Aerodynamic Gain: Side skirt strakes and extended front splitter clean underbody flow.
• 2x2 Twill Carbon Weave: Authentic weave under high-gloss UV-protective clear coat.
• Weight Savings: Noticeably lighter than factory plastic counterparts.
• OEM Mounting Points: Uses factory bolt locations. Professional installation recommended.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → light and well-balanced
• The production method widely chosen in motorsport
• Minimal UV fading over years

Vehicle Fitment

This Lamborghini Huracán MSY body kit fits the following Gen 1 models:

• Huracán LP610-4 Coupé (2014-2018) — V10 5.2L FSI (610 hp)
• Huracán LP580-2 RWD Coupé (2016-2018) — V10 5.2L (580 hp)
• Huracán Performante (2017-2019) — V10 5.2L (640 hp) — verify rocker geometry before order

Important notes:

• Body kits are primarily for the Coupé. Spyder soft-top mechanism may conflict with rear aero elements; contact BYC before ordering for Spyder fitment.
• NOT compatible with Huracán EVO / EVO RWD / STO / Tecnica / Sterrato (2019-2024).
• NOT compatible with Audi R8 Type 4S — shared platform but Huracán-specific bodywork.
• Do not confuse with our other Huracán Gen 1 aero SKUs (V Front Bumper, V Front Hood, SD Spoiler, SD Side Skirt, V Spoiler, V Full Spoiler) — each is a separate design.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. Remove OEM front bumper, side skirts and rear bumper undertray.
2. Test-fit each carbon panel and check 3-4 mm panel gaps.
3. Mount with OEM bolt locations plus 3M VHB tape backing where indicated.
4. Torque the supplied hardware to the manufacturer's recommended torque.
5. Final paint/body matching by a qualified bodyshop.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer at least 30 cm from the surface.

FAQ

Does this fit Huracán EVO?
No. The EVO gen has a different bumper geometry.

Compatible with Audi R8?
No. R8 and Huracán share a platform but use different body panels.

Compatible with Huracán Spyder?
Optimized for Coupé. Spyder soft-top may interfere with rear aero — confirm with BYC before ordering.

Compatible with Performante?
Performante has slightly different front bumper and rocker geometry; share your VIN before ordering.

Can I buy single pieces?
Yes — V Front Bumper, V Front Hood, SD Spoiler, SD Side Skirt are available as individual SKUs.

Shipping time?
Body kits ship as oversized freight via partner palletized couriers. In-stock items ship within 1-3 business days via partner couriers.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon parts, BMW M carbon parts, Porsche carbon spoilers, Ferrari carbon parts, and more.