Lamborghini Urus Prepreg Dry Carbon Fiber Mirror Cap

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber Mirror Cap set transforms the side profile of the world's fastest super-SUV with a more aggressive, lighter, and more premium finish than the factory chrome/satin parts. Manufactured in Europe and quality-controlled by BYC Performance, this Urus carbon mirror cap set bolts directly to OEM mirror housings — no cutting, no drilling, no modification.

For the Lamborghini Urus with its 4.0L V8 biturbo engine and 650-666 hp output, these dry carbon mirror caps are produced using the autoclave-cure method widely chosen in motorsport. Because the mirror housing has not changed across the Urus lineup, this set fits Urus, Urus S, Urus Performante and the 2024+ Urus SE.

Key Features

• Prepreg Dry Carbon Technology: Cured in an autoclave under high heat and pressure for a more consistent weave and homogeneous resin distribution.
• Fits All Urus Trims: Mirror housing geometry is identical across base, S, Performante and SE since 2018.
• Lightweight Build: A worthwhile weight saving over factory plastic/chrome covers; reduces mirror vibration at speed.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Clip-on installation on factory Urus mirror heads (plug & play).
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, and car wash chemicals.
• Pair Included: Left + right covers shipped together.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Urus carbon mirror cap set fits the following models:

• Lamborghini Urus (2018, 2019, 2020, 2021, 2022) — 4.0L V8 biturbo, 650 hp
• Lamborghini Urus S (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp
• Lamborghini Urus Performante (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp, lifted
• Lamborghini Urus SE (2024+) — 4.0L V8 biturbo + PHEV, 800 hp combined

Important notes:

• Because the mirror housing did not change with the 2024 facelift, this set fits both pre-facelift and post-facelift (SE) Urus — a rare advantage within the Urus lineup.
• This product is NOT compatible with the Porsche Cayenne 9YA, Audi Q8 or Bentley Bentayga. They share the same MLBevo PL52 platform with the Urus but use different mirror geometry.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Contents: Left + Right mirror cap (pair)
• Origin: Europe

Installation Notes

Urus mirror cap installation is clip-on; professional installation is recommended but typically takes 15-20 minutes.

1. Fully close the mirror and access the clip channels under the mirror housing.
2. Loosen the OEM cover clips using a plastic trim tool.
3. Align the new carbon cover to the clip channels.
4. Press evenly from both sides until the clips audibly engage.
5. Repeat the same procedure for the opposite side.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does it fit my base Urus?
Yes. The set fits Lamborghini Urus base (2018-2022), Urus S, Urus Performante and Urus SE.

Compatible with the 2024 facelift Urus SE?
Yes. The mirror housing did not change with the facelift, so this set fits Urus SE (2024+) as well — a rare advantage not shared by front/rear bumper carbon parts.

Compatible with Porsche Cayenne or Audi Q8?
No. The Urus shares the MLBevo PL52 platform with the Cayenne 9YA, Q8 and Bentayga but the mirror housings are different.

Do I need to remove the entire mirror?
No. Only the outer cover is replaced; the glass, motor and housing stay in place.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty on this product.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Lamborghini Urus carbon parts, Lamborghini Huracán carbon diffusers, Audi RS carbon spoilers, BMW M carbon hoods, Porsche carbon mirror caps and Ferrari carbon parts.