Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Front Bumper

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber MSY Front Bumper is a complete carbon front fascia that replaces the entire OEM front bumper and coordinates with the MSY Front Lip and MSY Front Canard. Manufactured in Europe and quality-controlled by BYC Performance, this Lamborghini Urus carbon front bumper bolts to OEM mounting points and fundamentally transforms the front end to a race-grade look.

If you're building a serious Lamborghini Urus tuning project and want to completely renew the front end, this MSY front bumper is the answer. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts, stronger, and UV-stable. Aggressive air intakes and splitter platform suit the Urus's 4.0L V8 biturbo (Standard 650 hp, S/Performante 666 hp) character.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• Complete Front Bumper Replacement: Replaces the entire OEM front bumper; provides integrated mounting surfaces for the MSY Front Lip and MSY Front Canards.
• Coordinated MSY Set: Fully coordinated with MSY Front Lip + MSY Front Canard.
• Aerodynamic Design: Widened air intakes support engine and brake cooling.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Bolts to pre-facelift Lamborghini Urus (2018-2024) front bumper mounting points.
• UV & Chemical Protection: Clear coat resists fading, cracking, and stone chips.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon is made using wet lay-up with hand-applied resin cured at room temperature — leaving voids. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Urus MSY carbon front bumper fits the following pre-facelift trims:

• Lamborghini Urus (2018, 2019, 2020, 2021, 2022) — 4.0L V8 biturbo, 650 hp
• Lamborghini Urus S (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp
• Lamborghini Urus Performante (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp

Important notes:

• This product is NOT compatible with the post-facelift Lamborghini Urus SE (2024+, PHEV). The 2024 facelift completely changed the front fascia; SE owners should not order this product.
• The Urus shares the MLBevo PL52 platform with Porsche Cayenne 9YA / Audi Q8 / Bentley Bentayga, but front bumper geometries are completely different — this part fits Urus only.
• MSY Front Lip and MSY Front Canards are sold separately; ordering them together is recommended for a fully coordinated front set.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. Raise the vehicle, remove front bumper underbody screws and fender clip attachments.
2. Disconnect park sensor, PDC, headlight washer and adaptive cruise radar wiring from the OEM bumper.
3. Remove the OEM front bumper.
4. Test-fit the MSY carbon bumper; verify headlight and fender alignment.
5. Secure with supplied hardware to the manufacturer's recommended torque.
6. Transfer all sensor and radar connections to the new bumper; OBD diagnostic may be required for sensor calibration.
7. Professional installation strongly recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface. Periodically clear the air intakes.

FAQ

Does this bumper fit Urus Standard, S and Performante?
Yes. Pre-facelift Urus (2018-2024) Standard, S, and Performante share the same front bumper mounting geometry.

Does this fit the Urus SE (2024+)?
No. The 2024 facelift changed the front fascia entirely; this bumper does not fit the SE.

Compatible with Cayenne, Q8 or Bentayga?
No. MLBevo PL52 is shared but front bumper geometries are completely different.

Will park sensors, PDC and adaptive radar work correctly?
Yes. Sensor cutouts and radar mounting surface are reproduced in the MSY bumper. Professional calibration is recommended.

Are the MSY Front Lip and Front Canards included?
No, they are sold separately. For a fully coordinated set, ordering MSY Front Lip and MSY Front Canard is recommended.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Full bumpers are oversized freight and arrive in 3-7 business days.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.