Porsche 911 991 / 991.2 | Prepreg Dry Carbon Fiber TA Spoiler V2

Porsche 911 991 / 991.2 Prepreg Dry Carbon Fiber TA Spoiler (V2)

Engineered for Porsche 911 991/991.2 owners seeking a more aggressive TA aero character, this Prepreg (Dry) Carbon Fiber TA Spoiler V2 is an alternative-profile spoiler that mounts to the same OEM points as our classic TA spoiler. Made to factory-spec tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this Porsche 911 TA carbon spoiler V2 has a distinctly different wing profile from the sister TA Spoiler SKU.

The 911 is the rear-engine flat-6 sports car icon. The 991.1 (350-475 hp) and 991.2 (370-700 hp) generations span Carrera through GT2 RS. This TA Spoiler V2 offers a higher angle of attack and different tip treatment compared to the sister TA spoiler, designed for owners chasing a sharper, more 'WRC' character. Autoclave-cured prepreg carbon is noticeably lighter than OEM plastic.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure, a more consistent weave.
• TA V2 Design: Distinct from the sister TA Spoiler, more aggressive wing profile and tip treatment.
• Aero Contribution: Significant rear-axle downforce above 180 km/h.
• Lightweight: Noticeably lighter than OEM plastic spoiler.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play on factory 991 / 991.2 engine deck mounting points.

Prepreg (Dry) Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Clean the engine deck mounting area with isopropyl alcohol.
2. Dry-fit the spoiler and verify tip symmetry.
3. Secure with 3M VHB tape + supplied hardware.
4. Torque bolts to the manufacturer's recommended torque.
5. Avoid washing for 48 hours to allow adhesive cure.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon sealant every 6 months. Keep pressure washer at least 30 cm from surface.

FAQ

Does this fit the Porsche 911 992?
No. The 992 (2020+) has different engine deck geometry.

Does this fit the Porsche 911 997?
No. The 997 (2005-2012) is the previous generation.

Compatible with Cabriolet or Targa?
No. Coupé only.

Difference between TA Spoiler V2 and classic TA Spoiler?
The V2 has a higher angle of attack, more aggressive tip treatment, and a sportier stance. The classic TA Spoiler offers a cleaner profile. Both bolt to the same OEM mounting points.

Compatible with GT3 / GT3 RS / GT2 RS?
This spoiler targets standard Carrera/Turbo engine deck geometry. GT trims already have factory wings. Confirm fitment before ordering.

Does it improve high-speed stability?
Yes. The more aggressive V2 profile delivers noticeable downforce above 180 km/h.

Shipping time?
In-stock items ship within 1-3 business days. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes Porsche 911 carbon parts, Porsche carbon spoilers, Audi RS carbon diffusers, BMW M3 carbon hoods, and many more high-quality carbon components.