Lamborghini Huracán (2014-2018) Prepreg Dry Carbon Fiber Rear Bumper

Engineered for Lamborghini Huracán Gen 1 (LP610-4 / LP580-2 / Performante, 2014-2019) owners who want motorsport-grade quality, this Prepreg Dry Carbon Fiber Rear Bumper transforms the rear of your V10 supercar with track-inspired aggression and a noticeably lighter panel. Manufactured in Europe and quality-controlled by BYC Performance, this Lamborghini Huracán carbon rear bumper bolts directly to OEM mounting points — no cutting, no permanent modification required.

If you're building a serious Lamborghini Huracán tuning project and want a part that fully departs from the factory plastic bumper in both look and finish, this dry carbon rear bumper is built for you. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts and offers outstanding UV resistance. The Huracán's 5.2L V10 NA mid-engine drivetrain (shared MLBevo platform with the Audi R8) defines Lamborghini's mid-engine supercar DNA — and this aggressive rear bumper completes the LP-series geometry in authentic carbon weave.

Key Features

• Prepreg (Dry) Carbon Technology: Autoclave-cured under high heat and pressure — a more consistent weave.
• Direct OEM Fit: Bolt-on to factory Lamborghini Huracán Gen 1 (LP610/LP580/Performante) mounting points.
• Lightweight: Noticeably lighter than the factory plastic rear bumper.
• High Strength: Carbon fiber offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon under high-gloss UV-protective clear coat.
• Aerodynamic Integration: Diffuser channels and exhaust cutouts match LP-series bumper geometry one-to-one.
• UV & Chemical Protection: Years of fade and crack resistance against fuel splash and road tar.

Prepreg (Dry) Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → light and well-balanced
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Huracán carbon rear bumper fits:

• Lamborghini Huracán LP610-4 Coupé (2014, 2015, 2016, 2017, 2018) — 5.2L V10, 610 hp, AWD
• Lamborghini Huracán LP610-4 Spyder (2016-2018) — 5.2L V10, 610 hp
• Lamborghini Huracán LP580-2 (RWD, 2016-2018) — 5.2L V10, 580 hp
• Lamborghini Huracán Performante (2017-2019) — 5.2L V10, 640 hp, ALA active aero

Important notes:

• NOT compatible with Huracán EVO (2019-2024). EVO has completely redesigned rear bumper and integrated diffuser geometry.
• NOT compatible with Audi R8 Type 4S. Although Huracán and R8 share MLBevo, rear bumper geometry differs.
• For Performante trim, check geometric clearance with the ALA active rear wing.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

1. Lift the vehicle; remove rear wheel arch liners.
2. Remove rear bumper side bolts and underbody clips.
3. Disengage exhaust tip pass-throughs from the OEM bumper.
4. Test-fit the carbon bumper for alignment.
5. Secure with supplied hardware to the manufacturer's recommended torque.
6. Verify exhaust tip clearance and reverse camera connections.
7. Professional installation recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the Huracán EVO (2019-2024)?
No. Gen 1 (LP610/LP580/Performante) and EVO have completely different rear bumper / integrated diffuser geometry.

Does this fit the Audi R8 Type 4S?
No. Although Huracán and R8 share the MLBevo platform, their rear bumpers, taillights, and exhaust positions differ.

Is there a forged carbon version?
Yes. BYC catalog also includes a forged carbon (chopped strand) rear bumper variant for Huracán Gen 1.

Compatible with the Spyder?
Yes. Huracán Coupé and Spyder share the same rear bumper geometry.

Any conflict with Performante's ALA rear wing?
Bumper geometry is Performante-compatible; ALA active aero is a separate component.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. Oversized panels may ship by partner freight.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon diffusers, BMW M3 carbon diffusers, Porsche carbon spoilers, Ferrari carbon components, and many more high-quality carbon parts. All products undergo strict quality control.