Lamborghini Huracán EVO | Prepreg Dry Carbon Fiber Rear Diffuser

Lamborghini Huracán EVO (2019-2024) Prepreg Dry Carbon Fiber Rear Diffuser

Engineered for Lamborghini Huracán EVO (2019-2024) owners who demand motorsport-grade quality, this Prepreg Dry Carbon Fiber Rear Diffuser transforms the rear of your V10 supercar with STO-level aggression while delivering measurable high-speed downforce gains. Made to factory-spec mounting tolerances by leading manufacturers around the world and quality-controlled by BYC Performance, this Lamborghini Huracán EVO carbon rear diffuser bolts directly to OEM mounting points: no cutting, no drilling, no permanent modification required.

If you're building a serious Lamborghini Huracán EVO tuning project and need a part that exceeds the factory plastic diffuser in both performance and finish, this dry carbon rear diffuser is built for you. Autoclave-cured prepreg carbon fiber delivers a noticeably lighter, far stronger panel than wet-lay carbon parts, with outstanding long-term UV resistance. Engineered to match EVO-generation aero (5.2L V10 NA, 640 hp AWD / 610 hp RWD) and the Y-shaped lower intake geometry borrowed from STO and Tecnica, this aggressive diffuser is the ideal aesthetic and functional upgrade for both track and street.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave.
• Aggressive EVO Diffuser Geometry: Parallel fin layout matched to EVO's Y-shaped lower intake architecture. Noticeably lighter than the factory plastic part.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• Aerodynamic Performance: Optimized diffuser channels accelerate underbody airflow and generate downforce at high speeds.
• 2x2 Twill Carbon Weave: Authentic carbon fiber pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Plug & play installation on factory Huracán EVO (2019-2024) mounting points.
• UV & Chemical Protection: Long-life clear coat protects against fading, cracking, fuel splash, and road tar.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• A controlled resin ratio → lighter and stronger
• The production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Installing the Lamborghini Huracán EVO carbon diffuser is a direct replacement of the factory part. Professional installation is recommended:

1. Lift the vehicle; remove rear bumper underbody screws.
2. Detach the OEM plastic diffuser from clips and bolts.
3. Test-fit the carbon diffuser for alignment.
4. Secure with supplied hardware to the manufacturer's recommended torque.
5. Verify exhaust tips are centered in diffuser cutouts (EVO twin trapezoidal outlets).

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface.

FAQ

Does this fit the Huracán Gen 1 (LP610/LP580/Performante)?
No. Gen 1 and EVO have completely different rear bumper / integrated diffuser geometry. A separate Gen 1 carbon rear bumper is available in our catalog.

Compatible with STO and Tecnica trims?
Yes. STO (2020-2023) and Tecnica (2022+) share rear diffuser mounting points with the EVO.

Compatible with the Sterrato off-road variant?
Rear geometry is compatible, but Sterrato has additional underbody skid plates and reinforcement; check fitment before installation.

Does this fit the Audi R8?
No. Huracán and R8 share the MLBevo platform but differ in rear bumper, exhaust position, and diffuser.

Compatible with the EVO Spyder?
Yes. EVO Coupé and Spyder share identical rear diffuser mounting points.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes Lamborghini Huracán carbon parts, Audi RS carbon diffusers, BMW M3 carbon diffusers, Porsche carbon spoilers, Ferrari carbon components, and many more high-quality carbon parts.