Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Rear Bumper & Diffuser

Engineered for Lamborghini Urus owners who demand track-grade aggression, this Prepreg Dry Carbon Fiber MSY Rear Bumper & Diffuser is a complete combined set that transforms the rear of the world's most powerful super-SUV. Manufactured in Europe and quality-controlled by BYC Performance, this Lamborghini Urus carbon rear bumper bolts to OEM mounting points and replaces the entire factory rear bumper assembly.

If you're building a serious Lamborghini Urus tuning project and want to swap the restrained factory rear bumper for one with motorsport-grade aggression, this MSY combined rear bumper and diffuser is the answer. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts, with superior structural integrity and long-term UV resistance. Designed to match the Urus's 4.0L V8 biturbo character (Standard 650 hp, S/Performante 666 hp), the aggressive diffuser channels increase high-speed downforce.

Key Features

• Prepreg Dry Carbon Technology: Pre-impregnated carbon plies cured in an autoclave under high heat and pressure for a more consistent weave.
• MSY Combined Design: Rear bumper and diffuser integrated as a single styling unit with aggressive channels and vertical strakes.
• Race-Grade Strength: Carbon fiber offers very high strength for its weight.
• Aerodynamic Performance: Optimized diffuser channels accelerate underbody airflow and generate downforce.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• Direct OEM Fit: Bolts to pre-facelift Lamborghini Urus (2018-2024) factory mounting points.
• UV & Chemical Protection: Long-life clear coat resists fading, cracking, fuel splash, and road tar.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving air voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Lamborghini Urus MSY carbon rear bumper & diffuser fits the following pre-facelift trims:

• Lamborghini Urus (2018, 2019, 2020, 2021, 2022) — 4.0L V8 biturbo, 650 hp
• Lamborghini Urus S (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp
• Lamborghini Urus Performante (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp

Important notes:

• This product is NOT compatible with the post-facelift Lamborghini Urus SE (2024+, PHEV). The 2024 facelift changed the rear fascia geometry — SE owners must verify with BYC before ordering.
• The Urus shares the MLBevo PL52 platform with Porsche Cayenne 9YA / Audi Q8 / Bentley Bentayga, but bumper geometries differ — this part fits Urus only.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Origin: Europe

Installation Notes

Full rear bumper and diffuser replacement requires professional installation:

1. Raise the vehicle, remove rear bumper underbody screws and fender clip attachments.
2. Disconnect park sensor and PDC wiring from the OEM bumper.
3. Remove the OEM rear bumper.
4. Test-fit the MSY carbon bumper for alignment.
5. Secure with supplied hardware to the manufacturer's recommended torque.
6. Verify sensors and exhaust tips are centered in the diffuser cutouts.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface.

FAQ

Does this fit Urus Standard, S and Performante?
Yes. Pre-facelift Urus (2018-2024) Standard, S, and Performante share the same rear bumper mounting geometry.

Does this fit the Urus SE (2024+)?
No. The 2024 facelift changed the SE rear fascia geometry. SE owners must confirm fitment with BYC before ordering.

Compatible with Cayenne, Q8 or Bentayga?
No. Although they share the MLBevo PL52 platform, bumper geometries are completely different.

Will park sensors and PDC work correctly?
Yes. Original sensor cutouts and wiring pass-throughs are reproduced in the MSY bumper.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Full bumpers are oversized freight and arrive in 2-5 business days.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.