Lamborghini Urus | Prepreg Dry Carbon Fiber MSY Side Skirt & Flare

Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Side Skirt & Flare

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber MSY Side Skirt & Flare is a complete carbon set that completes the super-SUV's side profile with an aggressive skirt + rear fender flare combination. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this Lamborghini Urus carbon side skirt and flare mounts directly to the OEM rocker line and rear fender surface.

If you're building a serious Lamborghini Urus tuning project and want a Performante-inspired widened side profile, this MSY side skirt and flare set is the answer. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts, stronger, and UV-stable. The widened profile complements the Urus's 4.0L V8 biturbo (Standard 650 hp, S/Performante 666 hp) character.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• Complete Side Set: Side skirt + rear fender flare in one coordinated kit.
• Performante-Inspired Line: Widened side profile, aggressive fender contour.
• Lightweight Strength: Carbon offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Bolt-On + 3M VHB Mount: Combined attachment on OEM rocker line and rear fender surface.
• UV & Chemical Protection: Clear coat resists fading, cracking, and stone chips.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon is made using wet lay-up with hand-applied resin cured at room temperature, leaving voids. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Clean the rocker and rear fender surface with isopropyl alcohol.
2. Test-fit the skirt and flare for alignment.
3. Apply 3M VHB tape and secure with supplied clips/screws to the manufacturer's recommended torque.
4. Keep the vehicle dry for 24 hours for full adhesive cure.
5. Professional installation strongly recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface.

FAQ

Does this set fit Urus Standard, S and Performante?
Yes. All pre-facelift Urus (2018-2024) trims share the same side skirt and fender geometry.

Does this fit the Urus SE?
Generally yes, side profile is largely retained. SE owners should verify with BYC.

Compatible with Cayenne, Q8 or Bentayga?
No. MLBevo PL52 is shared but side skirt profiles differ.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Side skirt sets are oversized freight and arrive in 2-5 business days. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.