Lamborghini Urus | Prepreg Dry Carbon Fiber MSY Vented Front Fender

Lamborghini Urus (2018-2024) Prepreg Dry Carbon Fiber MSY Vented Front Fender

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber MSY Vented Front Fender brings a Performante-inspired aggressive side profile to the super-SUV with functional venting. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this Lamborghini Urus carbon front fender fully replaces the factory metal fender and routes hot air out of the brake / engine bay through an integrated vent.

If you're building a serious Lamborghini Urus tuning project and want a Performante-style aggressive wing profile, this MSY vented front fender is the answer. Autoclave-cured prepreg carbon fiber is noticeably lighter than wet-lay parts, stronger, and UV-stable. The aggressive contours and functional vents amplify the Urus's 4.0L V8 biturbo (Standard 650 hp, S/Performante 666 hp) motorsport DNA.

Key Features

• Prepreg Dry Carbon Technology: Autoclave-cured under high heat and pressure for a more consistent weave.
• Functional Vent: Integrated vent extracts hot air from the engine bay and brake areas.
• Performante-Inspired Profile: Pronounced side contour and widened surface line.
• Lightweight: Significant weight reduction over OEM steel fender; carbon offers very high strength for its weight.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under a high-gloss UV-protective clear coat.
• Direct OEM Fit: Bolts to pre-facelift Lamborghini Urus (2018-2024) front fender mounting points (sold as pair).
• UV & Chemical Protection: Clear coat resists fading, cracking, and stone chips.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts use wet lay-up with hand-applied resin cured at room temperature, leaving voids. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

1. Loosen front bumper and headlight retainer bolts as required.
2. Remove OEM fender; disconnect side marker and sensor wiring.
3. Test-fit the new carbon fender for alignment.
4. Secure with supplied hardware and clips to the manufacturer's recommended torque.
5. Transfer side marker and sensors to the new fender.
6. Professional installation strongly recommended.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle 30 cm from the surface. Periodically clear vent channels with compressed air.

FAQ

Do these fit Urus Standard, S and Performante?
Yes. All pre-facelift Urus (2018-2024) trims share the same fender mounting geometry.

Does this fit the Urus SE (2024+)?
Generally yes. Fender geometry is largely retained. SE owners should verify with BYC before ordering.

Compatible with Cayenne, Q8 or Bentayga?
No. MLBevo PL52 is shared but fender profiles differ.

Can I use OEM side markers?
Yes. Side marker and repeater lamp mounting points are preserved.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof.

Shipping time?
In-stock items ship within 2-5 business days via partner couriers (oversized). Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world. Our catalog includes Lamborghini carbon parts, Audi RS carbon diffusers, BMW M carbon spoilers, Porsche carbon parts, and Ferrari carbon parts.