Lamborghini Urus | Prepreg Dry Carbon Fiber TC Spoiler

Lamborghini Urus Prepreg Dry Carbon Fiber TC Spoiler

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber TC Spoiler mounts on the upper edge of the rear tailgate and complements the TC kit's front/rear aero parts with an aggressive upper spoiler. Imported from leading manufacturers around the world and quality-controlled by BYC Performance, this Urus TC carbon spoiler bolts directly to the factory tailgate spoiler carrier using 3M VHB tape plus mounting points.

For the Lamborghini Urus with its 4.0L V8 biturbo engine and 650-666 hp output, this TC spoiler sharpens the rear upper edge while contributing to rear-axle stability at high speeds. When combined with the TC Rear Diffuser and TC Rear Air Duct Add-on, the entire rear face transitions to a unified carbon TC composition.

Key Features

• Prepreg Dry Carbon Technology: Cured in an autoclave under high heat and pressure for a more consistent weave.
• TC Style Geometry: Prominent lip edge and a profile tuned to the TC kit aesthetic.
• Lightweight Build: Noticeably lighter than the factory plastic spoiler.
• Aerodynamic Build: Upper flow separation edge contributes to rear-axle stability at speed.
• 2x2 Twill Carbon Weave: Authentic carbon pattern under high-gloss UV-protective clear coat.
• 3M Tape + Mounting: Professional install uses 3M VHB tape + factory mounting points.
• UV & Chemical Protection: Long-life clear coat.

Prepreg Dry Carbon vs. Wet Carbon: Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature, leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Installation Notes

Urus TC spoiler installation uses 3M VHB tape backing plus the factory spoiler mounting points. Professional installation is recommended.

1. Clean the upper edge of the tailgate with isopropyl alcohol.
2. Ensure surface temperature is above 15°C.
3. Dry-fit the spoiler and measure both edges for symmetry.
4. Peel the 3M backing in stages and press firmly for 30 seconds with even pressure.
5. Avoid slamming the tailgate during the first 24 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface. Inspect tape edges after washing.

FAQ

Compatible with base Urus, Urus S and Urus Performante?
Yes. All three trims share the same pre-facelift tailgate geometry.

Compatible with Urus SE (2024+ facelift)?
No. The facelift altered tailgate contours.

Used together with the TC Rear Diffuser and TC Rear Air Duct Add-on?
Yes. With all three installed, the rear face (upper spoiler + upper air duct add-on + lower diffuser) becomes a unified carbon TC composition.

Compatible with Porsche Cayenne or Audi Q8?
No. Despite the shared MLBevo PL52 platform, tailgate geometry differs.

Will rain damage dry carbon parts?
No. Autoclave-cured prepreg carbon is fully waterproof and weather-resistant.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey. Parts sourced to order are delivered within 30 days of the order date at the latest.

Warranty?
Manufacturing defects are covered by a 24-month BYC warranty, in addition to your legal rights.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading manufacturers around the world and supplying them to the Turkish market. Our catalog includes Lamborghini Urus carbon spoilers, Lamborghini Huracán carbon parts, Audi RS carbon spoilers, BMW M carbon spoilers, Porsche carbon spoilers and Ferrari carbon parts.