Lamborghini Urus Prepreg Dry Carbon Fiber TC Front Fender Air Canard

Engineered for Lamborghini Urus owners, this Prepreg Dry Carbon Fiber TC Front Fender Air Canard mounts on the leading edge of the front fender as a TC kit canard. Manufactured in Europe and quality-controlled by BYC Performance, this Urus TC carbon fender canard bonds directly to the factory fender surface with 3M VHB tape; no cutting or drilling required.

For the Lamborghini Urus with its 4.0L V8 biturbo engine and 650-666 hp output, this canard pair carries the TC kit aesthetic onto the fender line and directs airflow from the front axle toward the wheel arch at speed. When combined with the TC Front Lower Lip, TC Front Upper Lip and TC Front Air Duct, the entire front face works as a unified TC composition.

Key Features

• Prepreg Dry Carbon Technology: Cured in an autoclave under high heat and pressure for a more consistent weave.
• TC Canard Geometry: Aggressive winglet profile projecting outward from the leading edge of the fender.
• Pair Included: Left + right canard shipped together.
• Lightweight Build: Adds approximately 0.4-0.6 kg; minimal impact on front-axle weight.
• 2x2 Twill Carbon Weave: Deep carbon weave under high-gloss UV-protective clear coat.
• 3M VHB Tape Mounting: Bonds directly to the factory fender surface; no cutting or drilling required.
• UV & Chemical Protection: Clear coat resists road chemicals and stone chips.

Prepreg Dry Carbon vs. Wet Carbon — Which Is Better?

Most aftermarket carbon parts are made using wet lay-up, where resin is applied by hand and cured at room temperature — leaving voids and inconsistent weight. Prepreg (dry) carbon:

• Cured in an autoclave under high heat and pressure → a more consistent weave
• a controlled resin ratio → lighter and stronger
• the production method widely chosen in motorsport
• Minimal UV fading over years of use

Vehicle Fitment

This Urus TC carbon front fender canard set fits the following models:

• Lamborghini Urus (2018, 2019, 2020, 2021, 2022) — 4.0L V8 biturbo, 650 hp
• Lamborghini Urus S (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp
• Lamborghini Urus Performante (2022, 2023, 2024) — 4.0L V8 biturbo, 666 hp, lifted

Important notes:

• This product is NOT compatible with the Lamborghini Urus SE (2024+ facelift, PHEV). The facelift changed front fender geometry.
• This product is NOT compatible with the Porsche Cayenne 9YA, Audi Q8 or Bentley Bentayga.

Technical Specifications

• Material: Prepreg Carbon Fiber (2x2 Twill Weave)
• Manufacturing: Autoclave Cure
• Finish: High-Gloss Clear UV-Protective Resin
• Color: Natural carbon weave black
• Contents: Left + Right canard (pair)
• Mounting: 3M VHB Tape
• Origin: Europe

Installation Notes

Fender canard installation uses 3M VHB tape. Professional installation is recommended.

1. Clean the fender surface with isopropyl alcohol and let dry.
2. Ensure surface temperature is above 15°C.
3. Use a template or masking tape to mark symmetric left/right positions.
4. Peel the 3M backing and press the canard for 30 seconds with even pressure.
5. Repeat the same procedure for the opposite canard.
6. Avoid washing or pressure washing for the first 24 hours.

Care & Maintenance

Wash with pH-neutral car shampoo. Apply carbon-safe sealant every 6 months. Keep pressure washer nozzle at least 30 cm from surface. Inspect the tape edges behind each canard after washing.

FAQ

Compatible with base Urus, Urus S and Urus Performante?
Yes. All three trims share the same pre-facelift front fender geometry.

Compatible with Urus SE (2024+ facelift)?
No. The facelift changed the front fender.

Will it damage the fender?
No. 3M VHB tape can be removed without damaging the factory paint (heat + floss-line technique). No cutting or drilling involved.

Used together with other TC front parts?
Yes. Together with the TC Front Lower Lip, TC Front Upper Lip and TC Front Air Duct, the front face becomes a unified carbon TC composition.

Compatible with Porsche Cayenne or Audi Q8?
No. Despite the shared MLBevo PL52 platform, front fender geometry differs.

Shipping time?
In-stock items ship within 1-3 business days via partner couriers. 1-2 day delivery across Turkey.

Warranty?
BYC Performance offers a 12-month manufacturer warranty.

Why BYC Performance?

BYC Performance is a Turkey-based performance tuning specialist sourcing premium carbon fiber parts from leading European manufacturers and supplying them to the Turkish market. Our catalog includes Lamborghini Urus carbon canards, Lamborghini Huracán carbon parts, Audi RS carbon canards, BMW M carbon canards, Porsche carbon spoilers and Ferrari carbon parts.